Unpacking your device
|CATM1 Tracking Device
(Note, the battery is inside the unit)
Dimensions: 115 x 75 x 23.5 mm
|USB Power Plug|
For best results follow the set-up order below.
Charging the device
NOTE: It can take up to 12 hours to fully charge for the first time.
All batteries should be charged for 12 hours before use. Fully charge the device when you receive it and prior to the first shipment.
Turning ON device
Disconnect the CATM1 Tracker from the USB charger before Turning ON the device.
NOTE: The Power LED will light up on touch detection.
Turning OFF device
The device can not be turned off physically.
Considerations for the best GPS performance:
NOTE: Your data frequency settings can impact the heat generated inside the device. This may impact the reading of the device temperature.